Posts Tagged ‘park city kimball art festival’

New Babies and Chair Delivery

July 25, 2013

It’s been a busy few months. We just completed a large chair order and delivered it to Midland. It consisted of 12 Greek God chairs and 2 Shangrila II Rockers. All made from Oregon Black Walnut. The delivery went smoothly, even though it rained my whole drive there. The rain stopped just long enough to unload and then it started right up. Couldn’t have timed it better. We are now getting ready for our three summer shows. The first takes place in Park City UT August 3-4. Then the next weekend is the Sculpture Show in Loveland CO August 10-11. The last show will be Sausalito Art Fest in Sausalito CA over Labor Day weekend. We are scrambling to create more unique and new pieces for these shows.

Not only are we busy with all this, but we just got two 9 week old Merle great dane puppies. The brothers names are Apollo and Perseus. They are a handful, but so much fun as well. Their training is underway and they are catching on real quick. Now if I can just get them to quit chewing on any piece of wood they can find. Lord knows we have a lot of that around here. Hopefully once the teething stage is done. Traveling will be more of a challenge. So Scott will have to go to some shows by himself. But hopefully as they get older we can take them to more places with us and get them used to it. Below are some pictures of them.

Boys in vehicle 3

The boys sleeping on the car ride home. They were so good and slept most of the way.

Boys at home 2

Here they are sleeping at home. They already have quite a few toys. Perseus is suckling on a squeakie toy.

Apollo sleeping

This is Apollo sleeping. He is a lighter grey with black markings.

Perseus sleeping

This is Perseus sleeping. He’s dark grey with black markings.

Seems like they do nothing but sleep, eat and poop right now. There is some rough housing in between. They are going to grow like weeds though. It’s quite amazing. Lukly their parents are not real big danes, so these guys won’t be giants. We are so enjoying them and glad we got them. They make us laugh all the time.

Here is the chair delivery to Midland TX. Their house isn’t quite finished, but when it is I will post more pictures. I can’t wait to see everything in their place and how beautiful the house is.

Matt Johnson carrying chair

Here Is Matt carrying in one of the Greek God chairs

johnson chairs delivered

This is all 12 chairs

johnson rockers in home

The 2 Rockers

Matt Johnson sitting in rocker

Matt trying out a rocker

This was a big order and we have to admit took a little longer than we had planned. But seeing them all complete is well worth it. And it is especially satisfying to know the customer is happy.

Advertisements

“Entangled” 6ft tall Sculpture and other new pieces

August 24, 2012

“ENTANGLED” was made from a 7ft Elm Log that Scott picked up in Ruidoso. The diameter was about 22″ round and it was quite a piece to work on. It was still green and that enabled Scott to be able to leave the bark on. He had to be very careful carving it to make sure the bark was left intact and to not go through the piece. Lots of super glue was used on the bark to secure it as well. The sculpture resembles two entities that are entangled or entwined together. You can see the two round parts that are at either end and the bodies encircle the piece. The color contrast that goes between the bark, the blonde sap wood and the brown tones of the inner log are a beautiful combination. The base was made from apple.

This picture shows how the bodies curve around the piece. This truly is a magnificent piece and would look great in a front entry of an office or home. It definately gets the attention.

“IRON DANCER” is made from Ironwood. This wood definately earns its name. It’s very hard to work with. We go through chains, grinder wheels and sandpaper like crazy when we work with this wood. But it is magnificent. The color variations are just incredible. This piece was carved from a root section and Scott incorporated that into the design. Since it had so many voids and cracks, I just loaded it with large chunks of turquoise all over it. This sculpture has a very dramatic appearance and would make a statement no matter where it is placed.

This side shows a large portion of turquoise that was inlayed.

This is the inside of “Iron Dancer”.  Lots of turquoise there as well.

“CANYON ARCHES” is my favorite. Scott carved three tunnels into this Juniper log and got this interesting design. Every side has a different view into the middle. It was quite hard to sand and apply finish because of this design, but WOW did it turn out beautiful. The old growth juniper really took on a deep orange color and is so rich.

This pictures shows another view inside the piece and a bit more turquoise inlay.

“VAN GOUGHS EAR”. Ok the name is funny, but it realy does look like an ear. Now if I had a little Jack Russel to place next to it, looking inside, I’d have a whole different look. This whimsical sculpture is made from mesquite. The log was odd shaped and Scott was unsure what to do with it. So, whala, it’s now an ear.  It perches on a tiger maple base and has turquoise inlay.

“FLAMINGO DANCER” is made from Alligator Juniper Burl. I love the dramatic effect of the skirt part that flows down. I was able to load that area with turquoise, and it really pops against the burl. There are three feet carved into this sculpture and the carved ruffles of the skirt are quite striking.

This photo shows off all the turquoise and carving in what I call “the skirt”. Look at the beautiful burl.

“SATIN SHEETS” is a wall piece made from gorgeous Maple Burl and well, it looks like satin sheets. Scott carved gentle waves and folds on this piece to show off the burl. It’s really incredible to see up close and would look great on a wall.

This wall piece was also made from a Maple Burl. Scott carved slight ridges into the piece and we then inlayed some petrified wood and turquoise into it. The picture doesn’t show how pretty this piece is. The petrified wood is a nice touch and adds more character to the wall sculpture.

Last but not least for this blog is this incredible giant platter made from old growth black walnut burl. The figure in this platter is so beautiful and is set off even more with the turquoise that was inlayed in about ever crack and crevice I could find. This is the last part of a large walnut burl that we had and I wish we had more. The figure is just like not other. I just might have to talk Scott into keeping this one, since we can’t get more.

Curly Maple Rocker

July 17, 2012

I promised that I’d post the professional photos of the Curly Maple with Ebony rocker and here they are. I normally go for the darker woods, but this is just gorgeous and one of our favorites. It just might be a keeper.

We just found out that we were accepted into the Celebration of Fine Art Scottsdale. This is the original 10 week show, being it’s 23rd year, that takes place Jan-March each year. This show is very hard to get into, so we feel very privileged to be a part of the Celebration family. We will miss some of our new friends that will be at the other show, but we can visit them when we all have time over the 10 week period. We are looking forward to the show and are already making plans for some spectacular pieces. We will also be having a gallery showing at Mystique Gallery in downtown Scottsdale while we are there and this should be very exciting.

Currently we are gearing up for two upcoming shows in Park City UT and Loveland CO. Scott leaves in two weeks and we’ve been busy creating new sculptures. While he is gone, I will post some of these pieces on the blog for all to see.

This photo shows how pretty the grain is.

Here you can see the contrast between the black of the Ebony and the light of the Maple.

We also had the Bentwood rocker that was made from Cherry and Ash photographed. This picture is much better than ours and really shows off this rocker.

Shangrila Happenings

June 2, 2012

Since getting back from our three-month adventure in Scottsdale, we’ve been busy doing things around home. That 10 week show really wore us out and it was nice to be home for a while and just relaxing, doing work around here and enjoying our peace and solitude. Scott’s mom came to visit for two weeks and we enjoyed having her here. Sampson’s health is improving. It’s been a slow recover but he’s getting stronger every day. It’s going to be a long process and we have to make sure he doesn’t over do it and go backwards. It’s hard to accept that he’s getting older, but he’s getting better and we hope to have him around for many more years. We also had a new cabin shell delivered. It will eventually join our original cabin with a sunroom connecting them. We have a lot of work to do before that point (wiring, insulate etc). But for now it houses our workout equipment, that has been stored since moving here, a place to put completed pieces, storage and a work area for me to inlay and do finish. It’s nice to have the work space. I’ve been able to work on a few new wall pieces for the upcoming shows (see some of them below). But first we want to show off our newest rocker made from Curly Maple and Ebony.

This Curly Maple with Ebony rocker has been on Scotts’ wish list for some time. So finally we made it. The Curly Maple has some incredible figure in it and Scott did a great job laying out the grain patterns to really show it off. The Ebony was inlayed into the runners, used for plugs and splines on the headrest. The black is a wonderful contrast to the white of the Curly Maple. Ebony is an expensive exotic wood and lends itself to being used for accents. I believe this is by far Scotts favorite rocker to date and it might be hard for him to give it up. But I’m sure this rocker is sure to go real fast. We will be having it professionally photographed in a few days and post those when they are ready. They are sure to wow more than our photos.

This shot is the best close up we could get to show the curly maple. But it doesn’t really bring out the figure. Hopefully the professional pictures will.

Headrest shows the Ebony splines that run through it. You can see some of the figure here as well.

Ebony inlayed into the runners. What a beautiful contrast.

Finally got a picture of this gorgeous Shangrila II rocker made from Bubinga. Photographer Brian Leddy took it last year while doing a photo shoot for NM Magazine. He traveled down to our place and took photos of several different pieces. But this is the one I really wanted. We never had photos taken of this beauty before it sold. It sure looks good with the NM landscape in the background. The Bubinga wood is one of my favorites because of how beautiful the grain is. And using it on this rocker makes it a real stand out.

This is another photo Brian took of Scott and I with the Bubinga rocker and one of our dinning chair prototypes. I really like how it turned out. The backdrop is so pretty with the trees in the distance. We get to look at this beautiful view every day.

Here are some of our most recent projects that we just completed for our show this week in CA.

This is a new wall piece design that we started doing. It consists of Mesquite log slices in various sizes layed out on plywood. Epoxy resin, mixed with black dye, is poured over the piece for one initial layer and the gold leaf is glued on top of that first layer. Then different stones (turquoise, coral, sugalite, canary and malachite) are layed on top of the gold leaf, still letting some of it show through. Another layer of Epoxy resin is poured over the entire piece till it is level with the top. The piece is then ground flat, sanded and a couple of coats of poly are applied to the wood pieces. Then another epoxy pour (possibly two) are the final process. We definitely go through the Epoxy Resin, but the effect is really cool. The ideas are rolling off of us and you will see many new designs coming up. Dims 37″ round

Made from Mesquite and Elm slices this small wall piece has routered grooves with different Gold Leaf layed into them. No final Epoxy pour was done. Just finish on it, to make it a little different. Dims  30″ round
NEW SCULPTURES

Here are a few of our newest sculpture pieces. Some will show up again in a later post after the Professional photos are done. But for now this is a quick over view of some.

PIERCED

This sculpture is still being worked on. But it will be complete just in time for the show. Professional photos will show up in a later post. As you can see it was quite a bit of work and took longer than planned. Scott first carved the outside and then outlined where he wanted to pierce with veins. He then drilled holes to a certain depth. Once he did that, he then started carving the inside till he reached those holes. This process took a while as he went down the sculpture to the bottom. Then he shaped the holes to a more appealing design. Dims are 31″ T x 14″diameter

GOLDEN MOSS

Made from Alligator Juniper this is a first in what will be a new design series for the sculptures. In a few areas of the piece gold leaf was applied to resemble the look of moss growing. Many coats of a gloss finish were applied to give it a high shine and add depth to the sculpture. Dims 12″T x 18″L x 6″W

EYE POD

Yes that is the name of this piece. Scott was being clever. To me it looks like a pappoose. This piece was a smaller version of one we had at the AZ Fine Art Expo. It is made from Mesquite Burl and came out just beautiful. Even though the design is simple in nature it is one of our favorites. It has such a nice natural shape to it and the little tunnel Scott created adds a uniqueness to it. Dims 26″L x 7″T x 5″W

Mini Me-Twister

This is the smallest twister we’ve made. So we’ve gone from 5ft tall, then 3 1/2 ft to this little 14″. I think this one will be popular, due to the size and design. This one perches on a Wenge base and can fit just about anywhere. Dims 14″T x 11″diameter

Mesquite Canyon

Another in our Canyon series, this one is sure to go fast. I inlayed turquoise into the natural cracks and Scott was sure to leave the yellow sap wood on the top, making a beautiful contrast. Dims 12″T x 14″L x 4″W

Bloom

Made from Alligator Juniper this vase-shaped vessel looks like a bloom opening up with the folds and curves in it. Even though it is only 12″ T and 8″ wide, it was one of the hardest to sand because of the tight curves and folds. This one stands on its own, making it easy to show off anywhere you place it. Dims 10″T x 12″ diameter

This Ironwood has turned out to be an incredible wood to work with. It has so much beautiful grain and color contrast. We don’t have much left, but Scott was able to squeeze out making this oblong heart shaped piece.