Posts Tagged ‘curly maple rocker’

Like Riding A Bike

June 28, 2019

Since making the move to creating all Sculpture, it’s been over 2 years since we made any furniture and about 3 years since we made a rocker. But when a previous customer had his home burn down in the big Paradise CA fire last year, thus loosing his rocker, he asked us to make a replacement. We couldn’t say no. Since it’s been a while making any furniture, we were a little slow on the start. But like the old saying goes, “It’s like riding a bicycle”. Some things you never forget. We may have had to refer back to old notes, remind ourselves of certain things and use reading glasses for some of the work (sucks getting old), it all came out beautiful and full filing in the end. When we decided to do the rocker, we also decided to make one for ourselves. I know, can you believe we actually don’t have one of our own rockers. But after we finish it up this winter, we will finally have our own.

Both rockers are made out of the same wood, but different styles. Our clients rocker is the Maloof style we used to do and ours will be the Shangrila II rocker. The wood is Curly Cherry and Tiger Maple. A beautiful combo with lots of figure. And once the cherry ages it will turn darker and be gorgeous. Since I documented the progress for our client, you can see all the stages that go into creating an incredibly hand made rocking chair.

These two pics show the start of creating a rocker. The first one is all the runner slices and stackers cut into thin pieces to be able to bend them into a form, as shown in the second pic.

rough sanding seat and legs

Next Scott has created the seat and all the legs. They are routered and joints cut. He then carves the seat and I rough sand all those parts.

The seat and legs are glued up and he moves on to creating the arms, headrest and spindles. The headrest starts out as a normal board. He cuts it and then flips that cut to achieve the curve in the headrest and it gets glued up. The back spindles are all cut out and ready to shape and sand.

The stackers are glued onto the runners where they will get shaped into the legs once they are attached. The headrest, arms and spindles are all test fit before sanding those parts.

Here the spindles are being test fit again before they are sanded and Scott starts the shaping of the legs into the seat.

The arms are applied and shaped in and then the sanding of the upper part of the rocker is done before adding in the spindles. It’s much easier to do this few step sanding process then to do it when the whole thing is together.

The final process involves attaching the runners. First they are test fit to see where they will sit. Then they are shaped and sanded before attaching them. Once attached and allowed to set for a day, they are then shaped into the legs.

The final sanding is done, taking it to 1500 grit by hand and sanding in between each coat of finish. Several coats of hand rubbed finish is applied and it is all done and ready for the customer.

So just like “Riding a Bike”, we were able to go a few years without making a rocker and pick it right back up to create this beauty for our customer. We hope this one is around much much longer for him.

Curly Maple Rocker

July 17, 2012

I promised that I’d post the professional photos of the Curly Maple with Ebony rocker and here they are. I normally go for the darker woods, but this is just gorgeous and one of our favorites. It just might be a keeper.

We just found out that we were accepted into the Celebration of Fine Art Scottsdale. This is the original 10 week show, being it’s 23rd year, that takes place Jan-March each year. This show is very hard to get into, so we feel very privileged to be a part of the Celebration family. We will miss some of our new friends that will be at the other show, but we can visit them when we all have time over the 10 week period. We are looking forward to the show and are already making plans for some spectacular pieces. We will also be having a gallery showing at Mystique Gallery in downtown Scottsdale while we are there and this should be very exciting.

Currently we are gearing up for two upcoming shows in Park City UT and Loveland CO. Scott leaves in two weeks and we’ve been busy creating new sculptures. While he is gone, I will post some of these pieces on the blog for all to see.

This photo shows how pretty the grain is.

Here you can see the contrast between the black of the Ebony and the light of the Maple.

We also had the Bentwood rocker that was made from Cherry and Ash photographed. This picture is much better than ours and really shows off this rocker.

Shangrila Happenings

June 2, 2012

Since getting back from our three-month adventure in Scottsdale, we’ve been busy doing things around home. That 10 week show really wore us out and it was nice to be home for a while and just relaxing, doing work around here and enjoying our peace and solitude. Scott’s mom came to visit for two weeks and we enjoyed having her here. Sampson’s health is improving. It’s been a slow recover but he’s getting stronger every day. It’s going to be a long process and we have to make sure he doesn’t over do it and go backwards. It’s hard to accept that he’s getting older, but he’s getting better and we hope to have him around for many more years. We also had a new cabin shell delivered. It will eventually join our original cabin with a sunroom connecting them. We have a lot of work to do before that point (wiring, insulate etc). But for now it houses our workout equipment, that has been stored since moving here, a place to put completed pieces, storage and a work area for me to inlay and do finish. It’s nice to have the work space. I’ve been able to work on a few new wall pieces for the upcoming shows (see some of them below). But first we want to show off our newest rocker made from Curly Maple and Ebony.

This Curly Maple with Ebony rocker has been on Scotts’ wish list for some time. So finally we made it. The Curly Maple has some incredible figure in it and Scott did a great job laying out the grain patterns to really show it off. The Ebony was inlayed into the runners, used for plugs and splines on the headrest. The black is a wonderful contrast to the white of the Curly Maple. Ebony is an expensive exotic wood and lends itself to being used for accents. I believe this is by far Scotts favorite rocker to date and it might be hard for him to give it up. But I’m sure this rocker is sure to go real fast. We will be having it professionally photographed in a few days and post those when they are ready. They are sure to wow more than our photos.

This shot is the best close up we could get to show the curly maple. But it doesn’t really bring out the figure. Hopefully the professional pictures will.

Headrest shows the Ebony splines that run through it. You can see some of the figure here as well.

Ebony inlayed into the runners. What a beautiful contrast.

Finally got a picture of this gorgeous Shangrila II rocker made from Bubinga. Photographer Brian Leddy took it last year while doing a photo shoot for NM Magazine. He traveled down to our place and took photos of several different pieces. But this is the one I really wanted. We never had photos taken of this beauty before it sold. It sure looks good with the NM landscape in the background. The Bubinga wood is one of my favorites because of how beautiful the grain is. And using it on this rocker makes it a real stand out.

This is another photo Brian took of Scott and I with the Bubinga rocker and one of our dinning chair prototypes. I really like how it turned out. The backdrop is so pretty with the trees in the distance. We get to look at this beautiful view every day.

Here are some of our most recent projects that we just completed for our show this week in CA.

This is a new wall piece design that we started doing. It consists of Mesquite log slices in various sizes layed out on plywood. Epoxy resin, mixed with black dye, is poured over the piece for one initial layer and the gold leaf is glued on top of that first layer. Then different stones (turquoise, coral, sugalite, canary and malachite) are layed on top of the gold leaf, still letting some of it show through. Another layer of Epoxy resin is poured over the entire piece till it is level with the top. The piece is then ground flat, sanded and a couple of coats of poly are applied to the wood pieces. Then another epoxy pour (possibly two) are the final process. We definitely go through the Epoxy Resin, but the effect is really cool. The ideas are rolling off of us and you will see many new designs coming up. Dims 37″ round

Made from Mesquite and Elm slices this small wall piece has routered grooves with different Gold Leaf layed into them. No final Epoxy pour was done. Just finish on it, to make it a little different. Dims  30″ round
NEW SCULPTURES

Here are a few of our newest sculpture pieces. Some will show up again in a later post after the Professional photos are done. But for now this is a quick over view of some.

PIERCED

This sculpture is still being worked on. But it will be complete just in time for the show. Professional photos will show up in a later post. As you can see it was quite a bit of work and took longer than planned. Scott first carved the outside and then outlined where he wanted to pierce with veins. He then drilled holes to a certain depth. Once he did that, he then started carving the inside till he reached those holes. This process took a while as he went down the sculpture to the bottom. Then he shaped the holes to a more appealing design. Dims are 31″ T x 14″diameter

GOLDEN MOSS

Made from Alligator Juniper this is a first in what will be a new design series for the sculptures. In a few areas of the piece gold leaf was applied to resemble the look of moss growing. Many coats of a gloss finish were applied to give it a high shine and add depth to the sculpture. Dims 12″T x 18″L x 6″W

EYE POD

Yes that is the name of this piece. Scott was being clever. To me it looks like a pappoose. This piece was a smaller version of one we had at the AZ Fine Art Expo. It is made from Mesquite Burl and came out just beautiful. Even though the design is simple in nature it is one of our favorites. It has such a nice natural shape to it and the little tunnel Scott created adds a uniqueness to it. Dims 26″L x 7″T x 5″W

Mini Me-Twister

This is the smallest twister we’ve made. So we’ve gone from 5ft tall, then 3 1/2 ft to this little 14″. I think this one will be popular, due to the size and design. This one perches on a Wenge base and can fit just about anywhere. Dims 14″T x 11″diameter

Mesquite Canyon

Another in our Canyon series, this one is sure to go fast. I inlayed turquoise into the natural cracks and Scott was sure to leave the yellow sap wood on the top, making a beautiful contrast. Dims 12″T x 14″L x 4″W

Bloom

Made from Alligator Juniper this vase-shaped vessel looks like a bloom opening up with the folds and curves in it. Even though it is only 12″ T and 8″ wide, it was one of the hardest to sand because of the tight curves and folds. This one stands on its own, making it easy to show off anywhere you place it. Dims 10″T x 12″ diameter

This Ironwood has turned out to be an incredible wood to work with. It has so much beautiful grain and color contrast. We don’t have much left, but Scott was able to squeeze out making this oblong heart shaped piece.