Archive for the ‘Recent Projects’ Category

Summer Happenings

July 30, 2017
It’s been a busy summer here, between getting ready for shows and planning for our fall schedule. We’ve been busy creating a lot of new and exciting sculptures, like this most recent one.

“New Inspiration” was carved from a long narrow Desert Ironwood log
Projects at the home front won’t pick back up till after our shows end. So that means this fall we’ll switch our work hats over to finishing up some unfinished projects and starting some new ones. But for now we’ll be working hard on new pieces for our last four shows and to replenish some of the galleries that carry our work. Below are just a few of the new pieces we have created.

“Bow Tie”-carved from an Alligator Juniper log into this two tunnel sculpture. Ebony bow ties were inlaid over some cracks to add a different element.


“Beauty Within” was carved from a Mesquite log. Scott carved waves, folds and bends into the piece, along with some small round cup shapes. All the natural worm holes and cracks were left natural, showing off the beauty in this wood.

“Enchantment” was appropriately named after our home state. It was carved from a large Alligator Juniper Burl into this incredible sculpture. The open vase shape has waves and bends showing off the incredible grain. Turquoise was inlaid into some of the natural cracks.
These are just a few of the new pieces we have to show off at our upcoming shows. To see our show schedule, please visit our website, http://www.shangrilawoodworks.com
It hasn’t all been work for us this summer. We had a little fun when my dad came to visit and we hiked up to the top of El Morro National Monument. We have lived here for 8 years and that was the first time we hiked it. About time. It was quite a hike, but we had a lot of fun. And what a gorgeous view from the top. If you ever visit our area, it is a must see. We plan to hike it more often, not only for the exercise but the view.

me and dad at El Morro

Me and my dad. He is 70 years young and out did the teenagers that were hiking the same time as us. Left us in the dust a few times as well.

half way up view of wall face

Walking back down the front side looking at a large crack in the rock face

View from top of El Morro

View from the top of El Morro. Incredible 360 degree view from up top. You can see for miles.
Advertisements

Wall Sculptures take on a new meaning

March 2, 2015

Our creative process is always evolving and improving. Recently we created new wall sculptures to add to the carved vessels and sculptures. The ideas keep flowing from Scott’s creative mind and he never ceases to surprise me. He recently changed out the wood backers on the wall sculptures with aluminum. A grinder was used to add lines and swirls to the aluminum to give it texture. The contrast between the wood and the aluminum really makes them pop and gives a more contemporary look. Already they are getting a lot of attention, in just one day. Currently they are on display at the 10 week show, Celebration of Fine Art, in Scottsdale, AZ. The show has four more weeks and ends on March 29th.

Bubinga wall piece 2

This wall sculpture features Bubinga wood

zebra wood wall piece

This wall sculpture features Zebra wood

Other wall sculptures that we recently created have patina copper backers. They are also very unique in that they also include other materials. This first one was carved from Apple wood. It features an Onyx ball that sends ripples out from the splash it created. Gentle ripples in various sizes were carved to create this sculpture and achieve the look. The green in the patina copper brings out the green in the onyx ball and the apple wood and makes it pop.

“RIPPLES”
Ripples

This next wall sculpture was carved from cherry wood. Abalone shell, along with other sea shells and rocks were added to the piece. Waves were carved around these pieces, creating a tide pool effect. The blue patina copper makes the colors in the abalone shell stand out and adds color to the sculpture.

“TIDE POOL”
Tide Pool

This next wall piece is a unique collaboration between Scott and another artist, Kathleen Hope. Her work in mixed media, mostly cement adds a completely different element to our carved wood. The vibrant blue and the white parchment are a beautiful contrast with the carved walnut.

collaboration wall piece

Another collaboration Scott did was with artist, Whitney Peckman. Her incredible embellished guard art was a great fit with our work. Scott carved on a piece of Osage Orange wood and Whitney created beautiful yellow Iris’s and leaves on it. This piece has a 3D look, giving the wall sculpture life.

Iris sculpture

To see more of our wall sculptures or other work, please visit our website. http://www.shangrilawoodworks.com
To see information on Celebration of Fine Art in Scottsdale, visit http://www.celebrateart.com

Chairs and Carving Stone, Oh My!

December 14, 2014

It’s been another busy year for us here in the land of Shangrila. A year of chairs and Sculptures. We tried a new experiment with our summer shows, of bringing only the carved sculptures. And it paid off. We finished our summer shows wiped out of inventory. And on top of that, we got quite a few chair orders off the internet. So all my hard work on the website and getting us out there in the world wide web, paid off.

A Rocken Mom
One exciting thing was a last minute rocking chair order for an expectant mother. A surprise from the husband and a few custom ideas turned out a beautiful rocker. It was made from highly figured black walnut with Koa accents.
hester wife close up
Here mom to be is trying out the rocker for the first time. It’s arrival was just in time for her to go into labor. So we couldn’t have timed that any closer. We’re glad that baby and mom can enjoy the rocker.

Eight is Enough
This next photo is the set of 8 Black Walnut Horn Back chairs that we just finished up in time to used for Christmas dinner.
Green 8 chairs

Big Collector
We finished up an order for a big collector that included 6 chairs. The black walnut with purple heart horn back chairs finished up this table set.
Adam table set

His collection includes the below pieces.
Adam hemisphere table
This walnut Hemisphere table has purple heart bread board ends.
Adam settee
Walnut Settee
Adam hinge table
Walnut rocker and a mesquite wooden hinge pedestal table
Adam coat rack
Mahogany carved coat rack
Adam sculpture
Juniper Carved Sculpture

Carving Stone
We have been enjoying carving in the Alabaster Stone and Scott has gotten quite creative. We recently picked up some different colors in the stone, like Transparent Orange and Peach. We should have a nice variety of Alabaster pieces this next year at Celebration of Fine Art, like this tunnel piece, “Three Ways Through”.
Three Ways Thru

Even though we are scrambling to get new pieces done for Celebration, because we had such a busy year, we count ourselves very blessed. It’s been a very busy year both with the business and at the homefront with all the projects we’ve had going on at home. We’re looking forward to next year and what surprises it holds.

Year of Big Orders

December 22, 2013

This year has been a year for bigger orders for us. After arriving home from our 3 month adventure at Celebration of Fine Art in April, we took off on an order for 12 Greek God chairs and 2 Shangrila II rockers. All were made from gorgeous black walnut. This order went to a beautiful new home in Midland TX. Here are some magazine quality photos the customer sent of all the chairs around their two tables and one of the rockers. We feel honored to have our chairs in this Texas sized home that is so lovingly decorated by its owners Matt and Kristina.

johnson chairs

This shot shows all 12 chairs around their two round tables. I love those gorgeous doors in the background.

johnson chair

This is a photo of a single Greek God chair out of walnut

johnson chair set

This photo looks like it came straight out of a magazine with a great shot of the entire room with the chairs in the background

johnson rocker

Here is one of the rockers downstairs. I love the rug underneath and the backdrop of the stairs.

solomon at johnson house

This is their great dane Solomon, looking so handsome with the chairs behind him. I just had to include this photo.

Our last big order of the year was a bedroom ensemble that went to Breckenridge CO. Breckenridge is our favorite CO town with all its quaintness and beauty. The ensemble consisted of a king size bed with night stands, two bent wood rockers with an end table, a low back chair and to be delivered in the spring is a custom desk. Everything was a combination of black walnut and tiger maple. It was such a striking combo and sure to be a stand out in this mountain home. Even though we had our challenges while working on this order, between getting sick and the very cold weather slowing us down, it went out the door last week and made it to CO in time for their Christmas family gathering. Here are some pictures that the designer, Cindy Gray of Interiors by Design in Breckenridge sent us.

bennett bed complete

This is the King Size bed out of black walnut with the tiger maple on the inset. The two nightstands are on either side of the bed out of the same wood.

bennett bed and nightstand

Here is a side shot

bennett rockers

The two bent wood rockers and the little end table sit facing the fireplace. Such a cozy setting.

bennett low back chair

This is where the desk will go with the low back chair.

bennett rocker and end table

Here is a nice shot of a rocker with the bed in the background

Now we can get down to getting ready to leave for three months in AZ to exhibit at Celebration of Fine Art. There is lots to do in such a short amount of time. But we’re looking forward to going, seeing old friends and customers and being in a warm climate. We’ll see how our two baby boys do out of their home setting. They should make lots of new two and four legged friends. The show starts on January 11th and goes till March 23rd. We plan to have many outstanding furniture and sculpture pieces at the show; along with creating many new sculpture pieces while we’re there. So if you can make it to the show, stop by and say hi and see what we have available. I will also be posting on our blog and facebook throughout the show, if you want to keep up on what we’re creating.

Fall Happenings and the Bending Process of the Bentwood Rocker

November 16, 2013

It’s been a busy fall here for us here in the land of Shangrila. Our two new little boys, Apollo and Perseus (pictured below checking out the shop) are growing like weeds (up to about 80 & 90lbs at just over 5 months old). They are keeping us very busy and entertained. But we’ve also been busy with customer orders, making a delivery to Mystique Gallery in Scottsdale and now getting ready for another 10 week adventure in AZ at Celebration of Fine Art. We just finished up a desk chair for a NM customer and are underway on a large bedroom order going to a new home in Breckenridge CO.  This large order not only has a king size bed with night stands, but a desk and low back chair and two bent wood rockers. The bending involved in making one of these unique rockers is quite a task. In this blog I will show some of the steps in the creative process.

boys in shop

Apollo and Perseus at 4 months old, checking out the shop. They love to see what’s going on and pick up pieces of wood to chew on.

Shangraw_21079-ZAPP

Here is a completed Bent wood rocker made from Cherry and Ash

The first process is prepping for all the gluing of the legs. This process has to take place before it gets to cold. So we were in a crunch to get all the major gluing done before winter hits. Luckily our weather has been gorgeous and not to cold, which is unusual for this time of year. Scott also changed how the glue up goes on the legs, making each leg of the rocker, three separate glue ups. This may take more time, but makes it a little easier and a much stronger bend.

Once the three bends are complete, the arm gets glued up on a separate form that lies on the leg. Normally we use contrasting woods, to really show off the whole process.

The seat and headrest (normally the same wood as the arms) are glued up, carved and shaped and then the process of putting the rocker together and shaping it, takes place. Even though the bending process of this rocker is very time-consuming and hard, the unique design makes this rocker like no other out there. It’s not the typical classic look, but has a more modern design.

bennett runner strips

This is a set of 9ft long strips ready for the first glue up.

bennett 1st runner glueup

Laminated strips glued up on the form. A lot of clamps go into this glue up. It takes both of us almost hour to do the glue up.

bennett 1st runner

This is what the first glue up looks like when taken out of the form.

bennett 2nd runner glueup

Here is the second glue up. This glue up is a little shorter than the first, building up the middle section of the leg, to make it stronger.

bennett runner glueup closeup

Close up of the second glue up

rocker legs 2nd glueups

Now four rocker legs are glued up and ready for the 3rd and final glue up to beef up the curve area.

final glue up on rocker leg

This is the last of the glue ups on the legs. A small section of laminations is glued on to the curve to make it stronger.

rocker laminated back slat

While some of the legs are being glued up, the laminations for the backrest are cut. Here we have walnut with ash in the middle. The contrasting woods blend in with the rest of the rocker and the ash in the middle of each backrest make them even stronger. These will be flexible backrests, that will flex as you rock.

glue up of rocker spindles

Here is two backrests being glued up on the form. This form was especially made to fit the curve of the back.

cutting rocker leg

Here is Scott trimming up the sides of the rocker leg. It is quite a cut on the bandsaw.

runner sanded

This is what the rocker leg looks like with all the bends glued on and sanded flat. Now it’s ready to attach the arm.

arm form

This is the arm form clamped on to the runner. This form is specially made to get a nice comfortable sweep while rocking.

arm glued up

The arm is now glued on to one of the legs. It’s a tricky glue up due to the curve and takes about an hour from start to finish.

rocker arms

Here you can really see the contrast in the woods, with the walnut arms glued on for one rocker. Next the seat gets attached, then the headrest and back spindles. And finally all the sanding and finishing. Stay tuned for the next blog, showing the completed rockers made from walnut and ash, along with the other bedroom furniture.

Shangri-La Woodworks, Scott and Stephanie Shangraw, HC 61 Box 40

This was our first bent wood rocker made from walnut and mesquite.

New Babies and Chair Delivery

July 25, 2013

It’s been a busy few months. We just completed a large chair order and delivered it to Midland. It consisted of 12 Greek God chairs and 2 Shangrila II Rockers. All made from Oregon Black Walnut. The delivery went smoothly, even though it rained my whole drive there. The rain stopped just long enough to unload and then it started right up. Couldn’t have timed it better. We are now getting ready for our three summer shows. The first takes place in Park City UT August 3-4. Then the next weekend is the Sculpture Show in Loveland CO August 10-11. The last show will be Sausalito Art Fest in Sausalito CA over Labor Day weekend. We are scrambling to create more unique and new pieces for these shows.

Not only are we busy with all this, but we just got two 9 week old Merle great dane puppies. The brothers names are Apollo and Perseus. They are a handful, but so much fun as well. Their training is underway and they are catching on real quick. Now if I can just get them to quit chewing on any piece of wood they can find. Lord knows we have a lot of that around here. Hopefully once the teething stage is done. Traveling will be more of a challenge. So Scott will have to go to some shows by himself. But hopefully as they get older we can take them to more places with us and get them used to it. Below are some pictures of them.

Boys in vehicle 3

The boys sleeping on the car ride home. They were so good and slept most of the way.

Boys at home 2

Here they are sleeping at home. They already have quite a few toys. Perseus is suckling on a squeakie toy.

Apollo sleeping

This is Apollo sleeping. He is a lighter grey with black markings.

Perseus sleeping

This is Perseus sleeping. He’s dark grey with black markings.

Seems like they do nothing but sleep, eat and poop right now. There is some rough housing in between. They are going to grow like weeds though. It’s quite amazing. Lukly their parents are not real big danes, so these guys won’t be giants. We are so enjoying them and glad we got them. They make us laugh all the time.

Here is the chair delivery to Midland TX. Their house isn’t quite finished, but when it is I will post more pictures. I can’t wait to see everything in their place and how beautiful the house is.

Matt Johnson carrying chair

Here Is Matt carrying in one of the Greek God chairs

johnson chairs delivered

This is all 12 chairs

johnson rockers in home

The 2 Rockers

Matt Johnson sitting in rocker

Matt trying out a rocker

This was a big order and we have to admit took a little longer than we had planned. But seeing them all complete is well worth it. And it is especially satisfying to know the customer is happy.

Shangrila Happenings

June 2, 2012

Since getting back from our three-month adventure in Scottsdale, we’ve been busy doing things around home. That 10 week show really wore us out and it was nice to be home for a while and just relaxing, doing work around here and enjoying our peace and solitude. Scott’s mom came to visit for two weeks and we enjoyed having her here. Sampson’s health is improving. It’s been a slow recover but he’s getting stronger every day. It’s going to be a long process and we have to make sure he doesn’t over do it and go backwards. It’s hard to accept that he’s getting older, but he’s getting better and we hope to have him around for many more years. We also had a new cabin shell delivered. It will eventually join our original cabin with a sunroom connecting them. We have a lot of work to do before that point (wiring, insulate etc). But for now it houses our workout equipment, that has been stored since moving here, a place to put completed pieces, storage and a work area for me to inlay and do finish. It’s nice to have the work space. I’ve been able to work on a few new wall pieces for the upcoming shows (see some of them below). But first we want to show off our newest rocker made from Curly Maple and Ebony.

This Curly Maple with Ebony rocker has been on Scotts’ wish list for some time. So finally we made it. The Curly Maple has some incredible figure in it and Scott did a great job laying out the grain patterns to really show it off. The Ebony was inlayed into the runners, used for plugs and splines on the headrest. The black is a wonderful contrast to the white of the Curly Maple. Ebony is an expensive exotic wood and lends itself to being used for accents. I believe this is by far Scotts favorite rocker to date and it might be hard for him to give it up. But I’m sure this rocker is sure to go real fast. We will be having it professionally photographed in a few days and post those when they are ready. They are sure to wow more than our photos.

This shot is the best close up we could get to show the curly maple. But it doesn’t really bring out the figure. Hopefully the professional pictures will.

Headrest shows the Ebony splines that run through it. You can see some of the figure here as well.

Ebony inlayed into the runners. What a beautiful contrast.

Finally got a picture of this gorgeous Shangrila II rocker made from Bubinga. Photographer Brian Leddy took it last year while doing a photo shoot for NM Magazine. He traveled down to our place and took photos of several different pieces. But this is the one I really wanted. We never had photos taken of this beauty before it sold. It sure looks good with the NM landscape in the background. The Bubinga wood is one of my favorites because of how beautiful the grain is. And using it on this rocker makes it a real stand out.

This is another photo Brian took of Scott and I with the Bubinga rocker and one of our dinning chair prototypes. I really like how it turned out. The backdrop is so pretty with the trees in the distance. We get to look at this beautiful view every day.

Here are some of our most recent projects that we just completed for our show this week in CA.

This is a new wall piece design that we started doing. It consists of Mesquite log slices in various sizes layed out on plywood. Epoxy resin, mixed with black dye, is poured over the piece for one initial layer and the gold leaf is glued on top of that first layer. Then different stones (turquoise, coral, sugalite, canary and malachite) are layed on top of the gold leaf, still letting some of it show through. Another layer of Epoxy resin is poured over the entire piece till it is level with the top. The piece is then ground flat, sanded and a couple of coats of poly are applied to the wood pieces. Then another epoxy pour (possibly two) are the final process. We definitely go through the Epoxy Resin, but the effect is really cool. The ideas are rolling off of us and you will see many new designs coming up. Dims 37″ round

Made from Mesquite and Elm slices this small wall piece has routered grooves with different Gold Leaf layed into them. No final Epoxy pour was done. Just finish on it, to make it a little different. Dims  30″ round
NEW SCULPTURES

Here are a few of our newest sculpture pieces. Some will show up again in a later post after the Professional photos are done. But for now this is a quick over view of some.

PIERCED

This sculpture is still being worked on. But it will be complete just in time for the show. Professional photos will show up in a later post. As you can see it was quite a bit of work and took longer than planned. Scott first carved the outside and then outlined where he wanted to pierce with veins. He then drilled holes to a certain depth. Once he did that, he then started carving the inside till he reached those holes. This process took a while as he went down the sculpture to the bottom. Then he shaped the holes to a more appealing design. Dims are 31″ T x 14″diameter

GOLDEN MOSS

Made from Alligator Juniper this is a first in what will be a new design series for the sculptures. In a few areas of the piece gold leaf was applied to resemble the look of moss growing. Many coats of a gloss finish were applied to give it a high shine and add depth to the sculpture. Dims 12″T x 18″L x 6″W

EYE POD

Yes that is the name of this piece. Scott was being clever. To me it looks like a pappoose. This piece was a smaller version of one we had at the AZ Fine Art Expo. It is made from Mesquite Burl and came out just beautiful. Even though the design is simple in nature it is one of our favorites. It has such a nice natural shape to it and the little tunnel Scott created adds a uniqueness to it. Dims 26″L x 7″T x 5″W

Mini Me-Twister

This is the smallest twister we’ve made. So we’ve gone from 5ft tall, then 3 1/2 ft to this little 14″. I think this one will be popular, due to the size and design. This one perches on a Wenge base and can fit just about anywhere. Dims 14″T x 11″diameter

Mesquite Canyon

Another in our Canyon series, this one is sure to go fast. I inlayed turquoise into the natural cracks and Scott was sure to leave the yellow sap wood on the top, making a beautiful contrast. Dims 12″T x 14″L x 4″W

Bloom

Made from Alligator Juniper this vase-shaped vessel looks like a bloom opening up with the folds and curves in it. Even though it is only 12″ T and 8″ wide, it was one of the hardest to sand because of the tight curves and folds. This one stands on its own, making it easy to show off anywhere you place it. Dims 10″T x 12″ diameter

This Ironwood has turned out to be an incredible wood to work with. It has so much beautiful grain and color contrast. We don’t have much left, but Scott was able to squeeze out making this oblong heart shaped piece.

Oregon Black Walnut Rocker and New Sculptures

February 14, 2012

I finally took pictures of this gorgeous black walnut rocker that is here  at the AZ Fine Art show. The figure in this rocker is just incredible. We have been very happy with this wood and have made a few rockers out of it. This new design, “Shangrila II” features the flexible back and they have been a huge hit since we started making them. We have been perfecting them since we first made them and I do believe they make the overall comfort of this rocker design far supperior to any out there.

Here is a side shot of the rocker. Notice all the beautiful curves this rocker has. It is very artistic to look at.

Wish this back shot was better quality so the figure in the headrest showed up better. But even in this picture you can see how beautiful it is.

Here are two rockers happily in their new California home. The one on the left is a Maloof inspired design out of mesquite and walnut. The one on the right is our Shangrila II rocker out of that gorgeous black walnut.

NEW SCULPTURE PIECES

“Forest Reef” is made from an approximate 800 year old Alligator Juniper tree. This piece has gotten the most attention at the show. It is 30″ long, 24″ wide and 19″ deep. Scott tunneled out the middle and created a bridge as you can see in this photo. Yes he used the chainsaw first to remove most of the wood, being very careful to leave the bark in tact. I inlaid turquoise into the natural cracks and then many hours of sanding later, this beauty was complete. It resembled a coral reef, so I looked up different names for reefs and found one called “Forest Reef”. It was meant to be. You have to see this in person to truly appreciate it’s size and beauty.

“Tango” is a mesquite wall piece that has some gentle waves and bends carved into it. It came from a large block of mesquite, so we were able to keep some of the natural shape and sap wood in it. I inlaid turquoise into some of the natural cracks to add a splash of southwest color. It is 27″x22″.

This is a new wood that we haven’t worked with before. Ironwood. And there is a reason they call it Ironwood. It’s as heavy as a metal iron. We thought we’d give it a try to see how it worked and we also needed more smaller pieces, since we sold our other smaller carved bowls. So we rescued a few logs from the fire pit here and went to work. Even though Scott didn’t have his big chainsaw, he was able to create a few. It took longer, but they turned out just wonderful. The grain patterns going from the almost black, to brown and then to the blonde are just beautiful. We’d get one coat of finish on them and they’d already have a buyer. They were willing to wait for them to be completely done to get them. We will definately be creating more pieces out of this. Especially some larger sculptural ones. So keep an eye out for these beauties.

Shangrila II rocker made from Black Walnut

September 20, 2011

This new rocker design, The Shangrila II, was made from gorgeous Black Walnut. The incredible figure in this piece really makes it an artistic focal point, but the incredible comfort makes you want to linger for just a while longer. Wish we could have gotten some professional photographs of this piece to really show it off. This was the most popular piece we had at the Midland show. People were first blown away by how beautiful it was, then again when they sat in it. We have more of this gorgeous black walnut on its way to make more rockers. The orders for these beauties are stacking up, so if you want one, get your order in now before there is a long wait list.

The grain for the headrest is layed out going the same direction as the rest of the chair, so everything has a nice flow to it. It is a more difficult process, but well worth it.  By laying the grain this way, you can see just how beautiful that black walnut is. We did something new with the headrest, by adding splines where all the boards meet. This adds strength to the headrest and an added element to the look. This process takes a little longer but really adds to the overall strength and beauty.

The flexback slats are made to move with you as you rock. These have been popular, so we will continue to make and perfect them. They consist of four layers of wood bent in a form, then they are shaped and made to fit in the seat and headrest. Each hole has to be at a precise angle or the lumbar won’t work. We decided to have them all float in the seat and headrest connection, so they flex better, won’t have the possibility of breaking and can expand and contract as needed. Wax is put in the holes and on the tips of the spindles to ensure they won’t make creeking noises and to lubricate the area as they move.

The seat also had some incredible figure in it, as can be seen in this picture. We added a little more sweep to the arms, which required a bigger piece of wood, but adds a little more room and comfort. Plus it looks great.

This side shot shows off some of that back sweep in the legs. This is achieved by taking laminated strips of walnut and bending them into a form. They sit in that form for a few days and then are hand shaped. You can see where the arm is shaped into that back leg for a nice flow. The bottom of the back leg, where it meets the runner was slightly modified for added strength and artistic appeal. Instead of going straight down to the runner it sweeps back slightly and is hand shaped into the runner.

Black Walnut Table Set and Buffet

September 19, 2011

This custom order was for a Texas customer. Although he has mainly mesquite in his home, he liked the look of the black walnut. And everything complemented each other just beautifully. The table was a carved pedestal base with a natural edge top that had to be hand done. There were six chairs total. Two Captains and four armless. The buffet had a natural edge top to blend in with the table top, along with log legs making up the front. Antler handles were used for the drawers and doors and the drawers were self closing. The Black Walnut came from Oregon and was some of the most incredibly figured and beautiful walnut we have ever seen. There was lots of tigering, color changes and some burl. This made for a spectacular set and we were lucky enough to show it off at the Midland Art show before delivering it and it got a lot of attention.

 

Black Walnut Table set and buffet at its new home in Texas.

The buffett had some of the most incredible figure on the drawers. The antler handles really give that western flare to this piece.

Just a sampling of how gorgeous the figure was on this walnut.

A natural edge with stipeling was done to the table top. Each hash mark was done by hand.